Decking
Stop Deck Stair Edges From Wearing Out With Aluminum Caps
Capping the front edge of deck stair treads with painted aluminum angle bedded in sealant, where the finish wears through first.
@hutcherson_homes · Instagram
Stringers, treads, and railings.
10 techniques
10 shown
No techniques match. Try removing a filter or shortening the search.
Decking
Capping the front edge of deck stair treads with painted aluminum angle bedded in sealant, where the finish wears through first.
@hutcherson_homes · Instagram
Stairs
Fixing stair spindles to treads that are already down and finished, using a dowel in the spindle base and a slightly oversize hole in the tread.
@red_design_and_build_ltd · Instagram
Stairs
An adjustable gauge that captures a space's true width and end angles — stair treads, alcove shelves — so the piece fits the first time.
2 takes from different creators
Framing
Bracing a wobbly knee wall down to the rim board through a hidden hole in the floor.
@builtright_co · Instagram
Stairs
Making a clamp out of a scrap of wood and a screw where no real clamp can reach, using the workpiece's own structure as the fixed jaw.
@crcarpentryremodeling · Instagram
Stairs
Using the third number of every step — the diagonal between rise and run — to prove each framing-square placement before cutting.
@makingtahoehome · Instagram
Stairs
A 2×4 spacer behind each stringer at framing time so drywall and skirt board slide in later instead of being scribed around stairs.
@lukekazmierowicz · Instagram
Stairs
The math and framing-square method for cutting stair stringers.
3 takes from different creators
Stairs
Pinch sticks that capture a tread's exact length and angles without numbers.
@stepharia_ · Instagram
Stairs
Cutting the bottom edge of concrete step forms at 45 degrees so a float can reach the whole tread below while the form stays in place.
@c.cs_customhardscapes · Instagram
Or start from the whole library: browse all 609 techniques · search by tool, material, or problem