Gates
Brace a Gate Frame in Compression — From the Top Outside Corner Down to the Hinge
Running the diagonal in compression from latch corner down to the hinge.
@the_fence_expert · Instagram
Technique: Fit a Gate Latch in Order
A gate latch is two parts that have to meet: one on the gate, one on the post. The usual order is to fix the post half first, because the post is solid and doesn't move, then measure across and fit the gate half to match.
That order asks you to get both positions right independently. The gate is hanging on hinges with a gap either side, it can swing and settle, and the two halves only have to be out by a small amount before the latch is stiff, catches on the way past, or misses entirely.
Reverse it.
The parts locate each other, so there's no cross-measuring and no allowance for the gap. It's a change of order, not of hardware.
DIYsolvr helps you find the best DIY videos. Browse all 609 techniques