Hang a Gate Latch by Fitting the Gate Half First and Resting the Other on It

Mounting the post half first means measuring both halves independently and hoping they meet. Fit the half on the gate, then rest the post half on it and mark from there — the parts locate each other, and you can set the striker high in its opening so a gate that settles still latches.

vinyl gate latch install, gate latch not lining up, gate won't latch, gate sagged and stopped catching, fence gate hardware order

beginner Tools: drill, screws Added Aug 24, 2026

The Problem

A gate latch is two parts that have to meet: one on the gate, one on the post. The usual order is to fix the post half first, because the post is solid and doesn't move, then measure across and fit the gate half to match.

That order asks you to get both positions right independently. The gate is hanging on hinges with a gap either side, it can swing and settle, and the two halves only have to be out by a small amount before the latch is stiff, catches on the way past, or misses entirely.

The Technique

Reverse it.

  1. Fit the half that mounts on the gate first, positioned where it wants to sit on the gate frame.
  2. Close the gate and offer the post half up to it, resting it directly on the part already mounted rather than measuring across to it. The two halves are now in exactly the relationship they'll be in when the gate is shut.
  3. Set the height so the striker sits high in its opening, not centred and not low. A gate settles on its hinges over time; starting high means the striker has room to drop and still be inside the catch.
  4. Mark and fix the post half while it's held in that position.

The parts locate each other, so there's no cross-measuring and no allowance for the gap. It's a change of order, not of hardware.

Pro tip: The same order works on almost anything that has to meet across a moving gap — strike plates on door jambs, catches on cabinet doors, barrel bolts into their keepers. Fit the part on the moving leaf, close it, and let the fixed half be located by the part that's already there.

DIYsolvr helps you find the best DIY videos. Browse all 609 techniques