Joinery
Drill Dowel Holes That Line Up -- With a Jig
Using a dowel jig's guide bushings and depth stop to drill square holes and transfer their positions to the matching piece.
@annabellejune_ · Instagram
Cutting and fitting wood joints.
10 techniques
10 shown
No techniques match. Try removing a filter or shortening the search.
Joinery
Using a dowel jig's guide bushings and depth stop to drill square holes and transfer their positions to the matching piece.
@annabellejune_ · Instagram
Gates
Three details that decide how long a wooden gate lasts: no trenched bottom rail, angled rail tops, and wedged through tenons.
@mitechjoinery · Instagram
Joinery
Burying a tilted table-saw blade in a sacrificial fence so miter-fold bevels come out crisp and the workpiece width never shrinks.
@stenewoodwork · Instagram
Joinery
Sizing the tenon to a third of the stock, cutting the mortise first, and fitting the accessible part to the enclosed one.
@katzmosestools · YouTube
Joinery
Grit or salt in the glue line that keeps boards from skating under clamp pressure.
@workshop_companion · Instagram
Joinery
A drinking straw that scoops glue cleanly out of inside corners.
@bonesandbuilds · Instagram
Joinery
Splicing boards end-to-end with a 45-degree cut for glue surface plus dowels for alignment and strength.
@takuwoodcraft · Instagram
Doors
Knife lines, relief nicks, and a protected border that keep the chisel honest while cutting a hinge gain without a router.
@thegreatnorfolkcarpenter · Instagram
Joinery
Supporting wood fibers at the chisel's exit — relieve the far corner first, or clamp a backer block tight against the back.
@tmwoodcrafts · Instagram
Joinery
Getting dowel holes to line up on both halves of a corner.
@antfactory_woodworking · Instagram
Or start from the whole library: browse all 609 techniques · search by tool, material, or problem