Joinery
Join Boards End-to-End With a 45-Degree Cut and Dowels
Splicing boards end-to-end with a 45-degree cut for glue surface plus dowels for alignment and strength.
@takuwoodcraft · Instagram
A dowel jig keeps the bit square to the face of the board. To place the matching hole in the second board, you set the jig's stop off a dowel standing in the first hole instead of measuring.
dowel holes don't line up, drill straight dowel holes, dowel joint by hand, join two boards with dowels, self centering dowel jig
If you are doweling two boards together by hand, the holes have to be square to the face, or the dowels fight each other going in. The second set has to land exactly where the first set did, or the joint will not close. Marking both pieces by eye and drilling freehand gets the holes close, not matched.
The part names below are the ones on the jig in the video. A different jig will have the same two features under different names.
DIYsolvr helps you find the best DIY videos. Browse all 609 techniques