Pull a Post Footing With a Strap
A ratchet strap around the footing and an 8-foot 2x4 as the lever, lifting a broken post's concrete anchor straight out of the ground.
Setting posts, hanging panels and gates, and tensioning wire.
11 techniques
11 shown
No techniques match. Try removing a filter or shortening the search.
A ratchet strap around the footing and an 8-foot 2x4 as the lever, lifting a broken post's concrete anchor straight out of the ground.
Heat-shrunk bitumen barrier sleeves that seal a fence post's ground-line zone against rot before setting.
Hiding rot-proof flat-sided steel fence posts inside an all-wood fence with nailers and cover pickets.
Moisture-activated preservative rods inserted into posts to stop rot from the inside.
Setting every slat in a fence run to the same gap and the same top line using a string line and one slat as a hanging spacer.
Running the diagonal in compression from latch corner down to the hinge.
Feeding heavy wire through a cross-drilled stick so you can pull and twist it with real leverage.
A strong knot for joining and tensioning two lengths of fence wire.
Tying off high-tensile fence wire to a post without staples.
Clean ways to terminate and trim high-tensile fence wire.
Two 4-foot fences 4 feet apart — deer can jump high or far but not both, and can't judge the double line, so they don't try.
Or start from the whole library: browse all 526 techniques · search by tool, material, or problem