Tiling
Get a Clean Transition Joint Between Wood and Stone Flooring
Clean seams where two different floor materials meet.
@kraggabad · Instagram
A transition strip is two parts — a metal track that screws down and a cap that snaps over it. Glue the cap to the track as you fit it, or it flexes between its snap points and clicks underfoot.
join laminate to hardwood, gap between two different floors, doorway floor trim, transition strip squeaks, t-molding install
Two finished floors meeting in a doorway leave a raw edge and usually a height difference. Laminate against hardwood, vinyl against tile — you need something over the joint that bridges the step and hides the cut ends of both floors.
Transition strips come as a kit and look like one piece. There are two parts: a metal track that screws down, and a cap that snaps into the track and covers it along with the screws.
Without it, the cap spans the gap between its two snap points and flexes when you step on it — that flex is the hollow click underfoot. A thin bead under the cap takes the movement out. A little is plenty.
DIYsolvr helps you find the best DIY videos. Browse all 609 techniques