Teflon Tape Wrap Direction
Wrapping thread seal tape clockwise so a fitting's own tightening motion presses it into the threads instead of unwinding it.
Heat the geared end of a drill chuck key, press it into the snapped-off PVC stub, let it cool so the plastic hardens around the teeth, then twist the stub right out of the fitting.
broken sprinkler riser, pipe broke off in the coupling, easy out for plastic pipe, remove broken threaded pipe
A threaded PVC pipe snaps off flush inside its fitting, and suddenly there's nothing to grip. The stub is recessed, the fitting is glued or buried in the wall, and the usual outcome is chewing at it with a screwdriver or cutting out the whole fitting and rebuilding the joint — a much bigger repair than the break itself.
A drill chuck key becomes a one-use extractor:
The fitting stays intact and takes a new pipe as if nothing happened.
Electrical, plumbing, and structural work may be regulated where you live — check local code before you start, and note that a permit may be required. More in our disclaimer.
DIYsolvr helps you find the best DIY videos. Browse all 526 techniques