Cabinetry
Stop a Sink Cutout Dropping Into the Cabinet With a Batten
Screwing a batten across the waste piece of a sink or hob cutout so the offcut cannot drop into the cabinet or pinch the blade on the last corner.
@rectify_carpentry · Instagram
Technique: Toe-Kick Nailer Block
The gap between the bottom of a cabinet box and the floor gets covered by a finish toe-kick trim, and that trim has to be fastened to something. Under the cabinet boxes themselves there's a ladder base or the box's own toe-kick to nail into.
Everywhere else there is nothing behind it. At a filler strip, at the end of a run, where a run turns a corner, or where the cabinets stop short of a wall, the toe kick keeps running but the structure behind it doesn't. You are left holding a length of finish trim against an open void, with nothing behind it for a brad to reach. Builder-grade installs solve this by ending the trim at the last cabinet, which is exactly the detail that reads as unfinished.
Fill the void with a nailer before the finish trim goes anywhere near it.
The result is a continuous toe kick with no gaps, no short returns, and nothing flexing when it gets kicked.
DIYsolvr helps you find the best DIY videos. Browse all 609 techniques