Square a Layout
Getting a corner to a true 90 degrees at building scale — the 3-4-5 triangle, equal-diagonal swings, and other full-size checks.
Tie a Layout String to a Stake So It Stays Tight
Technique: String-to-Stake Tie-Off
The Problem
A layout string that slips at the stake goes slack, and a slack line lies. Most quick ties either creep under tension or end the day as a jammed knot you cut off.
The Technique
- Loop the string around the stake once and pull it tight.
- Loop it around a second time.
- Take the tight standing part of the string — the side under tension — and pull it up and over the wraps.
The tensioned line now pins the wraps against the stake, so the harder the string pulls, the harder it locks. To release, lift the standing part back over and the wraps fall away — nothing to pick apart.
The motion is faster to watch than to read; the reel shows it in real time.
Pro tip: This locks best on a flat-sided stake, where the wraps can't rotate. On round stakes the whole wrap can slide and slowly give up tension — add a wrap or use a stake with corners when the line has to hold all day.
DIYsolvr helps you find the best DIY videos. Browse all 526 techniques