The Problem
If the same hairline crack keeps reappearing along an outside corner, filling it again will not hold. An outside corner is a metal or vinyl bead buried under compound. The crack is the compound letting go of that bead, which means something is moving — the bead itself, or the framing behind it.
What You'll Need
Spackle for small damage, all-purpose joint compound for the rest, drywall screws, a strip of fiberglass mesh tape, and a sanding block. Spray texture as well if the wall is textured.
The Techniques
Small nicks and dings
- Fill the damage with spackle or joint compound, pressed in with a putty knife.
- Let it dry completely.
- Second coat, dry, sand smooth. Repeat if it still reads as a dip.
A cracked or damaged corner
- Remove any loose material. Anything you can pick off is coming off later anyway.
- Check the corner bead for movement by pressing on it either side of the crack. If it gives, movement is what you are fixing.
- Re-secure a loose bead with a few drywall screws through it.
- If the bead is bent, reshape it with pliers before anything goes over it.
- First coat of joint compound over the repair.
- Bed a strip of mesh tape into that wet coat, centered on the crack line.
- Second coat over the tape, feathered out past it.
- Let it dry completely, then sand.
- Repeat coats until the corner reads straight sighted along the wall rather than head-on.
- Match the texture if the wall has one, then paint.
Pro tip: The mesh tape is why the repair holds where filler alone did not. Compound cracks along the line it cracked before; the tape crosses that line in one continuous piece, so later movement spreads across it instead of reopening the same seam.