Fix a Drywall Corner Crack That Keeps Coming Back

A crack at an outside corner comes from movement, so filler alone re-cracks along the same line. Re-secure the corner bead with screws, then bed mesh tape into the first coat of compound.

crack along the corner of the wall, drywall corner chipped, corner bead showing through, same crack keeps coming back, dinged wall corner, outside corner damage

beginner Tools: putty knife, drywall knife, drywall screws, pliers, sanding block, drill Added Nov 9, 2026

The Problem

If the same hairline crack keeps reappearing along an outside corner, filling it again will not hold. An outside corner is a metal or vinyl bead buried under compound. The crack is the compound letting go of that bead, which means something is moving — the bead itself, or the framing behind it.

What You'll Need

Spackle for small damage, all-purpose joint compound for the rest, drywall screws, a strip of fiberglass mesh tape, and a sanding block. Spray texture as well if the wall is textured.

The Techniques

Small nicks and dings

  1. Fill the damage with spackle or joint compound, pressed in with a putty knife.
  2. Let it dry completely.
  3. Second coat, dry, sand smooth. Repeat if it still reads as a dip.

A cracked or damaged corner

  1. Remove any loose material. Anything you can pick off is coming off later anyway.
  2. Check the corner bead for movement by pressing on it either side of the crack. If it gives, movement is what you are fixing.
  3. Re-secure a loose bead with a few drywall screws through it.
  4. If the bead is bent, reshape it with pliers before anything goes over it.
  5. First coat of joint compound over the repair.
  6. Bed a strip of mesh tape into that wet coat, centered on the crack line.
  7. Second coat over the tape, feathered out past it.
  8. Let it dry completely, then sand.
  9. Repeat coats until the corner reads straight sighted along the wall rather than head-on.
  10. Match the texture if the wall has one, then paint.
Pro tip: The mesh tape is why the repair holds where filler alone did not. Compound cracks along the line it cracked before; the tape crosses that line in one continuous piece, so later movement spreads across it instead of reopening the same seam.

DIYsolvr helps you find the best DIY videos. Browse all 609 techniques