Fixtures
Stop a Plastic Toilet Flange From Cracking With Two Fender Washers
Screwing fender washers down beside the closet bolts so a rocking toilet cannot crack a plastic flange.
@prevail.plumbing · Instagram
Technique: Paint-Transfer Plumbing Marks
Setting a vanity means cutting holes in its back panel that land exactly on the drain and supply stubs coming out of the wall. Measure-and-transfer works until it doesn't — one dimension read off the wrong edge and the vanity has an extra hole. And even with the holes in the right place, a hole saw pushed straight through from one side splinters the panel face as it exits.
This one comes from Steve, a bathroom remodeling teacher whose clips make the rounds — two tricks in one setup:
Cutting from both sides means the saw always exits into wood that's already cut, so neither face chips or blows out.
Electrical, plumbing, and structural work may be regulated where you live — check local code before you start, and note that a permit may be required. More in our disclaimer.
DIYsolvr helps you find the best DIY videos. Browse all 609 techniques