Cabinetry
Set Perfect Cabinet Door Reveals With a Two-Board Jig
Two overlapped 1x4s that register on the cabinet's bottom edge and hold each door at an identical reveal while the hinges go on.
@mullet_carpentry · Instagram
Technique: Support a Worktop Cutout as You Cut
A sink or hob cutout is a closed shape, so the last few inches of the cut release a piece of worktop that has nothing holding it. That offcut is heavy, and it drops straight into the cabinet below — onto the carcass side, or onto the pipework if the plumbing is already in.
The waste piece also moves while you are still cutting. One that sags on the last corner pinches the blade and tears the laminate at the edge of the cut you are trying to keep clean.
DIYsolvr helps you find the best DIY videos. Browse all 609 techniques