Adjustable Door Thresholds
The row of screws in an exterior door threshold jacks the strip up into the door's sweep, closing a draught gap without any new parts.
Exterior windows and doors: sealing, adjusting, and replacing.
12 techniques
12 shown
No techniques match. Try removing a filter or shortening the search.
The row of screws in an exterior door threshold jacks the strip up into the door's sweep, closing a draught gap without any new parts.
The angle the putty knife makes with the glass sets both the shape of the bevel and whether the surplus shears off cleanly or smears back over it.
Door frames with a composite or fiberglass lower jamb section that can't wick water, so the bottom never rots.
Setting a factory-hung door plumb with an even reveal — the standard prehung sequence, the split-jamb variant, and the long-screw trick that stops heavy doors sagging.
Taking a bent window-screen frame apart at the spline and corners, bending the rail true, and reassembling — saving the screen instead of replacing it.
Leaving the siding joint over head flashing uncaulked — it's the drainage exit for water that gets behind the siding.
A half-inch shim under exterior doors at install that buys rug clearance inside after the finished floor goes in.
Header, king studs, jack studs, doubled sill, and cripples — what each part of a framed window opening does.
A notched offcut that hooks the stool horn and marks apron and header lines identically on every window.
Washing window screens without leaving the soap residue that attracts dirt right back.
Coring out a snapped or seized screw with a plug cutter and plugging the hole for a fresh anchor.
Pitching a rough sill with a back dam so water that gets past the window drains out instead of soaking the framing.
Or start from the whole library: browse all 526 techniques · search by tool, material, or problem