Carpentry
Gable Angle Siding Template
Capturing the roof-pitch angle as a reusable template — and using it to pre-cut whole gable runs on the ground.
2 takes from different creators
Repairing and replacing siding.
8 techniques
8 shown
No techniques match. Try removing a filter or shortening the search.
Carpentry
Capturing the roof-pitch angle as a reusable template — and using it to pre-cut whole gable runs on the ground.
2 takes from different creators
Carpentry
Overlapping cuts that make two channel lengths read as one line while the vinyl keeps room to move.
@builtright_co · Instagram
Carpentry
Kinking siding nails sideways so they stand proud when the board is tapped back down, ready to pull.
@n.m._construction · Instagram
Carpentry
Nailing siding to hang — center of the slot, head just kissing the hem — so panels can move with temperature instead of waving.
@themroofboys · Instagram
Carpentry
A replaceable skirt board at the base of wood siding that absorbs splash and end-grain wicking so the siding above survives.
@strudane_ · Instagram
Carpentry
A pocket jig registering off the batten and course edge so exposed siding fasteners land identically every time.
@the_flagg_way · Instagram
Flashing
Leaving the siding joint over head flashing uncaulked — it's the drainage exit for water that gets behind the siding.
Jason C. Promes · Instagram
Carpentry
Slipping a flashing piece behind each siding butt joint instead of relying on caulk.
@awesomeframers · Instagram
Or start from the whole library: browse all 609 techniques · search by tool, material, or problem