Stop Weeds in Paver Joints With Polymeric Sand

Weeds keep coming back because the joints still hold soil. Wash them out to the bottom and refill with polymeric sand, which sets hard instead of staying loose.

weeds between pavers, weeds in driveway cracks, grass growing in paver joints, stop pulling weeds every summer, paver joint sand, weeds keep coming back in the patio

beginner Tools: pressure washer, leaf blower, garden hose Added Nov 9, 2026

The Problem

If you pull weeds out of your driveway joints every few weeks, the joints are the reason.

The Technique

Clear the joint out completely, then fill it with something a seed cannot root in.

  1. Get rid of the weeds. They pull much more easily after rain. If the ground is dry, a pressure washer loosens the roots.
  2. Pressure-wash the joints out, working the water down to the bottom of the joint rather than across the surface. Any soil left in there is somewhere a weed can start again.
  3. Let the pavers and the joints dry.
  4. Pour polymeric sand into the joints and sweep it in until they are full to the top. Pick a color that matches the pavers.
  5. Sweep and blow every grain off the paver faces before any water touches them.
  6. Water it in. On a slope, start at the bottom and work up, so the water you have already applied is not carrying loose sand down into joints you have not done yet.
  7. Leave it overnight to cure. It sets firm rather than staying loose like jointing sand, so keep off it until it has.
Pro tip: Polymeric sand sets wherever it is when the water hits it, including as a thin haze across the face of the pavers. That haze is much harder to remove than dry sand is to sweep.

DIYsolvr helps you find the best DIY videos. Browse all 609 techniques