Shingles
Hold Down the End of an Asphalt Shingle Course by Trimming the First Shingle
Cutting down the first shingle in a course so a nail lands close to the roof edge.
@wolfgangnatural · Instagram
Clean, prime, tape over the damage, seal it, bed geotextile into the sealant, seal again. The fabric layer is what stops the patch cracking where the roof moves.
rubber roof leaking, flat roof drips when it rains, epdm repair kit, fix a hole in a garage roof
A rubber flat roof — EPDM, or a liquid-applied equivalent — fails at points, not across the field. A dropped tool, a fixing that worked loose, or an old seam lets water past in one small place, and the water then travels under the membrane where you can't see it. The leak inside is rarely under the hole.
Patching a membrane badly is worse than the hole. Sealant smeared over a puncture bridges it and then cracks, because a flat roof moves constantly with temperature and a rigid patch over a flexible membrane has to fail somewhere.
The same sequence works along a seam that's opened up, not just over a puncture.
DIYsolvr helps you find the best DIY videos. Browse all 609 techniques