Hold Down the End of an Asphalt Shingle Course by Trimming the First Shingle

Cut at least 2 inches off the first shingle in the course. The shorter piece puts a nail closer to the roof edge, which holds the end down.

shingle flapping at edge of roof, loose shingle at rake, end shingle lifting in wind

intermediate Tools: utility knife Added Nov 13, 2026

The Problem

If the first asphalt shingle in a course of roof shingles goes on full length, its nearest nail can sit well in from the roof edge, leaving the end free to lift.

The Technique

  1. Cut at least 2 inches off the first shingle of the course.
  2. Set it at the edge and nail it as usual.

Shortening the piece moves its nail closer to the edge, so the end of the course is nailed down instead of held by a nail further in.

DIYsolvr helps you find the best DIY videos. Browse all 609 techniques