Knots
Secure a Strap Tail
Dealing with the loose webbing left over once a tie-down is cinched, so it can't flap, chafe, or foul the load in transit.
3 takes from different creators
Technique: The Taut-Line Hitch
Most knots commit you to the length you tie them at. When you pull a clothesline between two trees and finish it off, you keep whatever sag was in it: tightening it means untying and starting again with the rope pulled harder, and single-handed that needs both hands on the tension and both hands on the knot.
Rope also stretches. A tarp guy line tensioned at dusk is slack by morning, and slack line flaps and chafes through at the grommet.
The taut-line hitch grips the standing part of its own rope under load and slides along it when the load comes off, which makes the knot the tensioner. Tie it loose, then slide it to tighten.
Working end means the end you're tying with; standing part means the length running back to the anchor.
To tension the line, hold the standing part and slide the whole knot away from the anchor. To slacken it, slide it back. Under load it stays put.
DIYsolvr helps you find the best DIY videos. Browse all 609 techniques