Get an Even Finish on a Large Ceiling by Cross-Rolling the Second Coat

The Problem

If you have a large ceiling to paint, long passes from one wall to the other are hard to keep even.

The Technique

  1. Square off a corner. Start in a corner with a full roller and give one long stroke along one edge, as long as you can make it.
  2. Add a stroke along the other edge. Roll one along the adjoining side, so the two make an L out from the corner.
  3. Fill in the square. The two strokes mark out a square you can fill without taking the roller back to the wall.
  4. Square off the next section and repeat until the first coat is on, rolling in the same direction throughout.
  5. Roll the second coat at right angles to the first. The cross-hatch is what evens out the finish.

DIYsolvr helps you find the best DIY videos. Browse all 609 techniques