Change a Rotary Tool Bit Without Hunting for the Wrench

The Problem

If a rotary tool bit keeps rattling loose, or won't come out by hand, you need the little collet wrench. It's never where you left it.

The Technique

  1. Unscrew the collar at the nose of the tool until it's off its threads. Leave it on the tool.
  2. Slide it along until it fits over the collet nut.
  3. Press the shaft lock and turn the collar to loosen or tighten the nut.
  4. Screw the collar back onto its threads.
Pro tip: Not every model has this. If the inside of your collar is smooth and round rather than shaped to grip the nut, you still need the wrench.

DIYsolvr helps you find the best DIY videos. Browse all 609 techniques