Stop a Drill Bit Slipping by Locking Your Keyless Chuck

Many keyless chucks have a lock: after you tighten the sleeve, turn it back one audible click to hold the bit. Click it the other way to unlock it.

drill bit keeps slipping, drill bit coming loose, drill chuck won't hold bit, keyless chuck click, chuck lock and unlock

beginner Tools: drill Added Nov 13, 2026

The Problem

If a bit keeps working loose in your drill, you may not have locked the chuck.

The Technique

  1. Put the bit in and tighten the chuck sleeve by hand until it stops and clicks.
  2. Turn the sleeve back one click. You'll hear it and see the sleeve shift, and the bit is now locked.
  3. To change the bit, click the sleeve the other way to unlock it, then loosen it as usual.
Pro tip: Not every chuck has this. If yours doesn't click when you turn it back, the drill's manual will say whether it locks.

DIYsolvr helps you find the best DIY videos. Browse all 609 techniques