Reuse a Half-Used Can of Spray Foam by Oiling the Straw

The Problem

If you put a half-used can of expanding foam down overnight, the straw cures solid and the rest of the can goes with it.

The Technique

  1. As soon as you stop dispensing, wipe the foam off the tip of the straw.
  2. Spray a short shot of a light lubricant into the open end of the straw — WD-40 is what he uses.
  3. Fold the straw back against the can and seat it in the clip on the side.

The lubricant coats the inside of the straw where the foam would otherwise skin over, so the straw is still clear next time.

Pro tip: Clean the straw at put-away time, not when you next pick the can up. Cured foam inside a straw cannot be cleared out, which is why the other method on this page has to be done at the same moment.

DIYsolvr helps you find the best DIY videos. Browse all 609 techniques