Caulking & Sealants
Save a Part-Used Can of Spray Foam
Back-flushing the straw with the can's own propellant so a partly used can of expanding foam stays usable.
2 takes from different creators
Choosing caulk, cutting the nozzle, running and tooling the bead.
6 techniques
6 shown
No techniques match. Try removing a filter or shortening the search.
Caulking & Sealants
Back-flushing the straw with the can's own propellant so a partly used can of expanding foam stays usable.
2 takes from different creators
Grouting
Why every change of plane in a tile job gets flexible sealant instead of grout, and what belongs in the joint.
@thattilechick · Instagram
Caulking & Sealants
Venting the trapped factory air behind a caulk tube’s plunger with a small X cut so the bead stops when the trigger does.
@stevemenez · Instagram
Trim
Caulk for change-of-plane joints, rigid filler for flat seams.
@crcarpentryremodeling · Instagram
Caulking & Sealants
Loading an epoxy syringe with caulk for exact, tiny beads in corners and details where any nozzle cut delivers too much.
@moosepainting · Instagram
Caulking & Sealants
A right-sized nozzle cut, whittled tooling sticks, soapy water, and one confident pass — the four parts of a clean silicone bead.
@scott_diy · Instagram
Or start from the whole library: browse all 609 techniques · search by tool, material, or problem