Keep Paint Out of Threaded Holes With Foam Earplugs

The Problem

If paint gets into a threaded hole, you have to run a tap through every hole before the bolts will go in.

The Technique

  1. Roll a foam earplug tight between your fingers.
  2. Push it straight into the threaded hole while it's still compressed.
  3. Let it expand. It fills the hole and seals the threads.
  4. Paint or coat the part, then pull the plugs out.
Pro tip: This is most worth doing with thick coatings like bed liner, which fill threads faster than ordinary paint.

DIYsolvr helps you find the best DIY videos. Browse all 609 techniques