Prep Work
Test Whether Old Paint Is Oil or Latex With Rubbing Alcohol
Rubbing old paint with an alcohol-soaked rag to tell latex from oil-based before you repaint over it.
@handy.house.whisperer · Instagram
A rotary paint stripper uses a thick abrasive wheel instead of a sheet, so paint that gums up sandpaper in seconds gets cut through instead. On hard enamel it takes about 15 seconds to clear a patch an orbital sander would be fighting.
sandpaper clogs on paint, remove layers of old paint, strip painted trim, sanding enamel paint, paint gums up sanding disc, lead paint sanding
An orbital sander on a painted surface loads its disc with soft swarf in the first few passes, and a gummed disc burnishes instead of cutting. On a hard enamel, or a door with six decades of layers on it, most of the time goes into changing discs rather than removing paint.
A rotary paint stripper spins a thick, open abrasive wheel instead of a paper sheet, far deeper than a sanding disc and driven fast enough to cut paint rather than load up with it. Cutting gives the paint less time to soften and stick, and the wheel has enough depth that whatever does stick doesn't finish it.
On the enamel in the source, about 15 seconds cleared a patch down to where an orbital sander could take over. Expect to use both: the stripper to remove the coatings, a sander to get the surface ready for paint.
Where it is the right tool:
Where it doesn't: profiled moldings, carved detail, and anything where you need to stop at a precise line. The wheel is aggressive and takes wood as readily as paint once the paint is gone.
DIYsolvr helps you find the best DIY videos. Browse all 609 techniques