Stop Firewood Rounds Rolling With a 4x4 Screwed Across Your Block

The Problem

If you cut firewood to length on a chopping block, the round turns under the chainsaw and comes toward you. Most people end up pinning it with a boot.

The Technique

  1. Take a length of 4x4 as long as the block is wide.
  2. Screw it down flat across the top of the block, hard against one edge rather than in the middle.
  3. Run the saw down through the 4x4 to cut a channel an inch or two wide, part way through its depth. That channel is where the chain passes on every future cut.
  4. Lay the log on the block so it bears against the 4x4, and cut down into the channel.

The 4x4 is between you and the log, so the saw's pull seats the round against the stop rather than turning it toward you.

Safety note: Keep the screws out of the channel and out of the chain's path. Count them as you drive them so you know where they are — a chain into a screw throws the chain. Chaps, boots, eye and ear protection.

DIYsolvr helps you find the best DIY videos. Browse all 609 techniques