Use a Wax Crayon, Not Penetrating Oil, on a Heated Stuck Bolt
Penetrating oil sprayed on a torch-heated fastener evaporates before it can work — and it's flammable. Touch a wax crayon to the hot joint instead; the melted wax wicks into the threads.
@my_mobile_mechanic_
Tips
Replace a Missing Trim Clip With a Zip Tie and a Washer
When a push-clip is broken or gone, feed a zip tie through the fastener hole, back it with a washer so the head can't pull through, cinch it down, and trim the tail — the panel is held as well as the clip ever held it.
Clean Grease Off Your Hands With Sugar and Dish Soap
A palmful of plain sugar mixed with a squirt of dish soap scrubs grease and grime off hands as well as the orange-goop products — the sugar is the abrasive, the soap cuts the oil, and both are already in the kitchen.
Pop a Stuck Tail-Light Lens Loose With a Zip Tie, Not a Pry Bar
A zip tie slipped behind the corner of a stuck tail-light assembly and pulled along the edge releases the hidden clips without the chipped lenses and scratched paint a pry bar leaves.
Every technique here is written up from a creator's video and links back to it. All creators · browse all 526 techniques