Bleed-Proof Tape Lines
Sealing the tape edge before the color coat — with the base color, clear sealant, caulk, or polycrylic — so anything that bleeds through is invisible.
Stand Tall Furniture Upright Over a Block Stack So the Legs Survive
Tipping a tall cabinet up from the floor drives its full weight sideways through the two legs that touch down first. Stack blocks under the piece as a pivot point and the legs don't take any load until it's nearly vertical.
stand up a dresser without breaking the legs, flat pack furniture, tip up a bookcase safely, lifting heavy furniture by yourself
The Problem
A tall wardrobe or shelf unit gets assembled lying flat on the floor, and then someone has to stand it up. If you're working alone, that means lifting the top edge and walking it upright — and the whole time, the piece is pivoting on the two legs that touch the floor first. Furniture legs are made to carry weight straight down. During the tip-up they're taking the full weight of the piece as sideways shear at a joint that's often nothing more than a plastic foot on a screw thread. That's how legs snap before the piece has ever stood on them.
The Technique
- With the piece still lying flat, slide a stack of blocks — scrap lumber works — under it near the foot end. Build the stack tall enough that the piece rests on the blocks with the legs held clear of the floor.
- Lift the top edge and walk the piece up. It pivots on the block stack instead of on the legs.
- As it approaches vertical, the feet swing down and touch the floor, taking the weight the way they're designed to — straight down. Slide the blocks out.
Pro tip: The same thinking applies any time something heavy has to pivot on parts that weren't built for sideways load — appliance leveling feet, hairpin table legs, caster stems. Give it a sacrificial fulcrum and let the feet touch down last.
DIYsolvr helps you find the best DIY videos. Browse all 526 techniques