Repeat the Same Cut All Day From One Scribed Line at the Saw
Cutting a stack of pieces to one length — 11-1/4 inches in the creator's run — takes one measurement: mark it at the saw station and scribe a pencil line there. Every piece after that gets pushed to the line and cut, no tape involved.
repetitive cuts same length, stop block alternative, cut blocking without measuring, pencil line saw fence, batch cutting trick
The Problem
A pile of blocking cut to one length means the same measurement made thirty times — and thirty chances for the tape to read a sixteenth off. The measurement isn't the work; it's the setup.
The Technique
- Measure once from the blade and mark the length — 11-1/4" in the video — on the saw station.
- Scribe a pencil line at the mark.
- For every cut after: push the stock over until its end sits on the line, and cut. Same length every time, no tape.
Pro tip: A clamped stop block does
the same job with positive registration — the stock butts instead of
aligning by eye — and a pencil line does it with zero setup. The line
wins for a quick batch; the block wins when a blind-flush length matters
or the batch runs to dozens (see
the end-hook template for the
portable version of the same idea).