Rope Storage
Keeping rope and cord compact and tangle-free.
Stop a Loose Cord From Being a Tripping Hazard With Double-Sided Mounting Tape
Run double-sided foam mounting tape along a loose cord and press it to the floor — it bonds immediately to both the cable and the surface, so the cord stops sliding and stops being something to trip over. Warm it with a hair dryer first if you ever need to pull it back up.
cord tripping hazard fix, secure extension cord to floor, loose cable on floor safety, double sided tape for cords, cord management under couch
The Problem
A cord running loose across the floor — to power something under a couch, along a baseboard, wherever it can't be routed out of the way — is a tripping hazard, and it shifts underfoot every time someone walks near it.
The Technique
- Get double-sided heavy-duty mounting tape (the foam-backed kind sold for picture hanging and mounting, not thin office tape).
- Unroll enough to run the length of the cord you're securing, and cut it to length with scissors.
- Peel the backing and press the tape along the floor where the cord will sit.
- Lay the cord onto the exposed adhesive and press it down. The tape bonds immediately to both the floor and the cord, holding it flat and in place.
Work on smooth, clean, dry surfaces — painted floors, tile, and similar hard flooring all take the bond well. Full adhesive strength builds over about 24 hours, but the cord is secure well before that.
Pro tip: If you need to pull the tape up later, warm it first with a hair dryer. The heat softens the adhesive so it releases cleanly instead of tearing or leaving residue behind.
DIYsolvr helps you find the best DIY videos. Browse all 526 techniques