Stop a Plastic Toilet Flange From Cracking With Two Fender Washers

The Problem

If someone rocks or wiggles on a toilet, the plastic flange can crack where the closet bolts hold it.

The Technique

  1. Put the closet bolts in the flange as usual.
  2. Set a fender washer beside each bolt, overlapping the flange.
  3. Screw each washer down through the flange into the floor with a heavy-duty screw.
  4. Set the toilet.

The washers clamp the plastic down next to the bolts, so a rocking toilet pulls against the screws and not just the plastic.

Pro tip: Not covered in the video: on a concrete floor, wood screws won't hold. Use masonry screws and drill pilot holes with a masonry bit.

Electrical, plumbing, and structural work may be regulated where you live — check local code before you start, and note that a permit may be required. More in our disclaimer.

DIYsolvr helps you find the best DIY videos. Browse all 609 techniques