Attic Top-Plate Air Sealing
Sealing the seams where drywall meets the wall top plates — and the wiring holes through them — while the attic insulation is out.
Choosing and installing insulation.
5 techniques
5 shown
No techniques match. Try removing a filter or shortening the search.
Sealing the seams where drywall meets the wall top plates — and the wiring holes through them — while the attic insulation is out.
A recycled wood-fiber panel layer hung under the drywall — paired with mineral wool in the cavity — to keep sound from crossing walls and ceilings.
A tapered-on length of PEX that puts foam at the back of deep gaps.
Stringers and hardware cloth closing the underside of a cabin floor cavity before insulation, so nothing chews in from below.
Putty pads on the boxes, mineral wool in the cavity, and double 5/8 drywall with damping compound between — mass plus damping plus sealed flanking paths.
Or start from the whole library: browse all 526 techniques · search by tool, material, or problem